| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE 4 SCREWS HOLDING THE HANDLE.
| Screwdriver-phillips |
|
|
| 2 |
|
LIFT THE HANDLE UP.
|
| 3 |
|
DISCONNECT THE PLUG AND REMOVE THE HANDLE FROM THE MACHINE.
|
| 4 |
|
FLIP THE WIRE COVER DOWN TO EXPOSE WIRES.
|
| 5 |
|
PULL ALL THE WIRE CONNECTORS FROM THE PUMP. SLIDE THE THERMAL PROTECTOR FROM THE PUMP. NOTE: RECORD WIRE LOCATIONS TO HELP WHEN INSTALLING A NEW PUMP.
|
| 6 |
|
PULL THE HOSES ON EACH END OF THE SOLUTION PUMP TO REMOVE THEM.
|
| 7 |
|
PULL THE SOLUTION PUMP FROM THE GRAY RING BRACKETS. REMOVE THE FAT END OF THE PUMP FIRST AND THEN THREAD THE THIN END OUT OF THE GRAY RING BRACKET.
|
| 8 |
|
WHEN REPLACING THE PUMP, SLIDE THE LONG THIN END OF PUMP THRU BIGGER GRAY RING BRACKET FIRST, THEN INSERT THE FAT END OF PUMP. REVERSE STEPS 1 THRU 7 TO REASSEMBLE THE MACHINE. NOTE: YOU WILL NEED TO PURCHASE WIRE TIES TO TIGHTEN ALL SOLUTION HOSES TO THE TEES.
|